8 Things to Try When Your Key Won’t Turn in Ignition
If your car does not turn in the ignition, you are bound to get worried. It denies you the opportunity to travel in your car, and this comes with many inconveniences. The first remedy that your mind rushes towards is getting the services of a locksmith. However, there are a few remedies that you can try out before contacting locksmiths. Let us have a look at some of these remedies.
Wiggle the Steering Wheel
Most steering columns are usually designed to lock if the key is removed. The steering might have stuck in a position that locks your ignition. Just wiggle the steering stubbornly as you gently turn the key. In case this works out for you, then you don’t have an ignition or key problem. The steering locked.
Check the Gear Shift
In automatic transmissions, it might become impossible to turn the ignition key on if it is not in park or neutral. Shift the gear shaft in the right position and try it all over again. If the car ignites, then your vehicle is okay.
Is the Battery Dead?
If the battery is dead, the car will not ignite when you try turning it on.
You can ascertain the strength of the battery using a voltmeter or by trying to flash the car lights. If the battery is dead, you can replace it and continued enjoying seamless ignition.
Try the Spare Key
You can also try using your spare key. There are instances in which the primary key gets to worn out to turn the ignition. In case your spare key turns the ignition, then this is the underlying issue. It is time to drive down to a locksmith’s shop and get a copy of your spare key as soon as possible. When your key either wears off or gets lost, you will have a spare to bail you out.
Us a Silicon-Based Spray in the Lock
If the spare fails to turn the ignition on, then you should start considering ignition as the matter in hand. Try and squirt silicon-based lubricant into the ignition. This will help you in cleaning the wafers. It will also help you in removing the dirt and debris out of the ignition. This will pave the way for ignition. You should avoid oil-based lubricants or graphite. They are likely to gunk up with time. This will bring back the problem.
Jiggle the Key in the Ignition
Gently try to jiggle the key in the lock once more. In case the wafers have minor damages or the split wafers have jammed, this jiggling will resolve the issue and turn the ignition.
This marks the last attempt. This should only be tried after all other remedies have been exhausted.
Hire a local automotive locksmith to come out and fix it
If all these remedies fail, then you should hire a locksmith. One of the benefits of hiring a locksmith is that he will come to your location to do the job.
If you live in Point Grey, you can call our locksmith Point Grey company for quick service.